Backup file, have you ever heard of it? If your computer once goes wrong, you should not be strange with it. System goes crash or freezes up, though it is the last thing for all the users to see, it still comes up once at least. In such condition, will you choose to reinstall system or any other methods?
To reinstall system is thorough but tedious process is it? So, to use space files should be your first and best choice. Here is some useful knowledge about backup file you cannot miss.
Why it is a must to back up Windows XP?
Although Windows XP is quite popular by its powerful functions and friendly operating interface, it cannot deny that this system is still vulnerable to virus from Internet, malfunction of hardware and software and mistakes of users themselves. As a result, most users have to face a problem to restore system when system is destroyed seriously even cannot work normally.
Basically, there are two methods to restore system: one is to use necessary software and reinstall system and another is to back up system partition.
The latter is more attainable because it has three advantages at least.
First, it can backup both operating system and application. Second, compared with reinstalling system and software, to back file can save a lot of time and energy. Third, all the system backup files can be used all the other computers.
Since many Windows-based operating systems have provided the function of backing up system files, it is quite convenient to back up and restore files without using other software. However, as is known to all that, it really takes up time and disk space to do that.
And as Windows XP is really a bulk, you should not add too many programs to the partition where also restore system. In order to increase available disk space, you need to clean such backup files very well. Besides, it is better to backup files immediately after reinstalling system.
However there are still some problems you have to face. Every time you back up file after reinstalling system, there must be a large number of spare files in your system if you do that several times. It is another headache as long as you want a thoroughly clean system. The more you use spare files, the more junk and duplicate files in the system without question. What is worse, it is tedious and difficult to find those duplicate backup files in the system.
Wednesday, March 31, 2010
Monday, March 29, 2010
Cease Slow Windows Vista
As big consumer of system ram, Windows Vista post higher requirement of computer. So, if you are using this system, this content can help you speed up Windows Vista any time.
Although this system is blessed with so many wonderful functions, you have to pay for it or tolerate certain flaws, for example, more ram is required supporting Windows Vista. Do not worry; there are measures to fix the problem efficiently.
1. speed up Windows Vista: Close down certain services and unwanted programs
Open up "Control Panel" and uninstall certain programs that mean nothing to you any more. Meanwhile, some services are also of litter value for high Windows performance, just disable them immediately. By doing this, it can save a lot of space. This may be the great help that these services can do for computer. They include "Hibernation", "Error Reporting", "Offline Files", to name but a few.
2. speed up Windows Vista – Defragment your hard drive
Almost every storage action like creating, deleting, moving and copying files will cause the generation of fragmentation, As the amount of fragments grows over time, the hard drive will read and merge these separate fragments every time you launch a program or open a file, eventually the computer will be come slower and slower. Defragment the hard drive will help rearranging the separated file information and put them into continuous space. It will speed up computer remarkably. Remember to defragment regularly which is a very good practice to
3. speed up Windows Vista – clean out Windows registry
This is a very important step to speed up Windows Vista. Windows registry is just like a database which stores all the computer information. Every time you install a program, save a files or install a new driver on your computer, the registry keeps a record which called entry, these entries will be left in the registry even the related programs/files/drivers/ were removed thus make them obsolete even corrupted. That is the biggest reason for a slow running computer, if you keep ignoring these wasted entries, error messages might pop up from time to time and even crash your computer eventually
Although this system is blessed with so many wonderful functions, you have to pay for it or tolerate certain flaws, for example, more ram is required supporting Windows Vista. Do not worry; there are measures to fix the problem efficiently.
1. speed up Windows Vista: Close down certain services and unwanted programs
Open up "Control Panel" and uninstall certain programs that mean nothing to you any more. Meanwhile, some services are also of litter value for high Windows performance, just disable them immediately. By doing this, it can save a lot of space. This may be the great help that these services can do for computer. They include "Hibernation", "Error Reporting", "Offline Files", to name but a few.
2. speed up Windows Vista – Defragment your hard drive
Almost every storage action like creating, deleting, moving and copying files will cause the generation of fragmentation, As the amount of fragments grows over time, the hard drive will read and merge these separate fragments every time you launch a program or open a file, eventually the computer will be come slower and slower. Defragment the hard drive will help rearranging the separated file information and put them into continuous space. It will speed up computer remarkably. Remember to defragment regularly which is a very good practice to
3. speed up Windows Vista – clean out Windows registry
This is a very important step to speed up Windows Vista. Windows registry is just like a database which stores all the computer information. Every time you install a program, save a files or install a new driver on your computer, the registry keeps a record which called entry, these entries will be left in the registry even the related programs/files/drivers/ were removed thus make them obsolete even corrupted. That is the biggest reason for a slow running computer, if you keep ignoring these wasted entries, error messages might pop up from time to time and even crash your computer eventually
Decreasing Computer Performance? Enhance Computer Performance
It is quite frustrating that computer performance is decreasing day by day since you have been using it over time. So, you are supposed to learn some methods to enhance computer performance and keep computer always run like new. And this article can give a hand in this regard.
Though lots of methods can increase computer performance, you may neglect routine but easy methods probably. You can consult the following tips for high computer performance.
Too many shortcuts should come to first. It is rather common to use shortcuts because they are really helpful and convenient. Generally speaking, shortcuts are used to easily run certain software. Many users would like to put shortcuts on the desktop.
Though it is quite handy, system has to sacrifice computer performance. What is worse, such shortcuts may decrease system stability by taking up excessive system resources. Therefore, you had better keep proper shortcuts on the desktop and put others in the start menu. Besides, do not use duplicate shortcuts as possible as you can.
You can free up system resource as well. As any program is running in the Windows, it can eat up system resources gradually. What is more, certain programs may consume a large number, even you close them down, and its useless DLL files are still running in the ram. In this way, system running speed is decreasing day by day.
Go to “Registry Editor” and set a new entry of “Always Unload Dll” in the “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer” and then set the character string value as “1”. Last, exit this editor and restart computer, you can say goodbye to the hassle forever. If you fear to modify registry, it is wise to turn to a specific registry cleaner to get rid of the junks.
Besides, you can also delete temporary files, such as in the Internet temporary folders or move them to other disk in order to enhance computer performance. Remove needless programs and set proper virtual memory are good choices, too.
Though lots of methods can increase computer performance, you may neglect routine but easy methods probably. You can consult the following tips for high computer performance.
Too many shortcuts should come to first. It is rather common to use shortcuts because they are really helpful and convenient. Generally speaking, shortcuts are used to easily run certain software. Many users would like to put shortcuts on the desktop.
Though it is quite handy, system has to sacrifice computer performance. What is worse, such shortcuts may decrease system stability by taking up excessive system resources. Therefore, you had better keep proper shortcuts on the desktop and put others in the start menu. Besides, do not use duplicate shortcuts as possible as you can.
You can free up system resource as well. As any program is running in the Windows, it can eat up system resources gradually. What is more, certain programs may consume a large number, even you close them down, and its useless DLL files are still running in the ram. In this way, system running speed is decreasing day by day.
Go to “Registry Editor” and set a new entry of “Always Unload Dll” in the “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer” and then set the character string value as “1”. Last, exit this editor and restart computer, you can say goodbye to the hassle forever. If you fear to modify registry, it is wise to turn to a specific registry cleaner to get rid of the junks.
Besides, you can also delete temporary files, such as in the Internet temporary folders or move them to other disk in order to enhance computer performance. Remove needless programs and set proper virtual memory are good choices, too.
Thursday, March 25, 2010
How to Get rid of Duplicate Files
It is common that people would like to spring-clean their houses to greet the New Year. At the same time, do not forget that the computer, just as houses, also needs such cleanup completely since you have been using it for a long time. And it is time for you to do something for the computer.
When booting computer, do you find it is slower and slower to starting it up? Though there is not any virus in it, the files in hard disk make trouble probably. As for files, you may neglect the numerous pictures or songs in the hard disk. In fact, they are the main source of junk files. Does it surprise you?
Are duplicate pictures or songs really a hassle?
Well, if you are a fan of photography or music, it is no doubt that you may have put so many pictures or songs in your computer. Maybe you do not consider it is a problem, but for computer, it does. If you just take computer as storage but forget to clean it tidily, such duplicate files may pile up day after day in the hard disk.
It is really time-consuming and arduous work to clean hard disk. It requires you to be careful when handling the files. You should put useless and duplicate files in a directory. Besides, you should make clearly what kind of files you have put in and it will be easier for you to find or remove them next time.
The more important is, it is a must for you to form a good habit of putting the pictures or songs in specific folders in a specific disk. It is quite important for you to manage them in the future. This is the best way to improve computer performance.
Well, if you want to find such duplicate stuff quickly and easily, you have to check them one by one in every probable folder and to compare their names. It must be tedious to find them one by one if you have restored a huge number of photos or songs. In this regard, you had better turn to certain professional program to help you.
When booting computer, do you find it is slower and slower to starting it up? Though there is not any virus in it, the files in hard disk make trouble probably. As for files, you may neglect the numerous pictures or songs in the hard disk. In fact, they are the main source of junk files. Does it surprise you?
Are duplicate pictures or songs really a hassle?
Well, if you are a fan of photography or music, it is no doubt that you may have put so many pictures or songs in your computer. Maybe you do not consider it is a problem, but for computer, it does. If you just take computer as storage but forget to clean it tidily, such duplicate files may pile up day after day in the hard disk.
It is really time-consuming and arduous work to clean hard disk. It requires you to be careful when handling the files. You should put useless and duplicate files in a directory. Besides, you should make clearly what kind of files you have put in and it will be easier for you to find or remove them next time.
The more important is, it is a must for you to form a good habit of putting the pictures or songs in specific folders in a specific disk. It is quite important for you to manage them in the future. This is the best way to improve computer performance.
Well, if you want to find such duplicate stuff quickly and easily, you have to check them one by one in every probable folder and to compare their names. It must be tedious to find them one by one if you have restored a huge number of photos or songs. In this regard, you had better turn to certain professional program to help you.
Wednesday, March 24, 2010
Maintain Hard Disk
As a member of computer storage equipment, hard disk plays much important role in computer running. However, since hard disk belongs to magnetic media, it is unable to use stably as well as other equipments do such as memory. In fact, it is unavoidable for you to encounter various problems. What is worse, as disk is involved in system in-depth settings, you must solve some problems under DOS circumstance.
If you are not an experienced user, it will be head ache for you. Therefore, the best method to handle it is not to solve the problems when happen but learn how to prevent them in advance. So, in this article, I will tell you some simple methods to guard against hard disk problems.
Do not compress your hard disk.
In the past, it was common to compress disk by certain orders in hope to save more space. However, as compress volume file was augmenting gradually, its read-write speed was reduced obviously. What is worse, it might creak when reading or writing data which meant it worked with heavy burden. Nowadays, disk capacity has been expanded day by day, you do not have to worry about the low disk space problem. That is to say, it is necessary to compress disk on condition that there is enough disk space to run applications.
You should clear up hard disk regularly.
Proper disk defragmentation can improve computer speed without question. If too many disk fragments are accumulating excessively, it can slow down visiting speed and harm disk tracks as well. Defragment disk can help you clear up those rubbish and make computer regain high speed. But at the same time, you should not defragment disk frequently, it can also harm disk.
Besides, you should know how to hold hard disk correctly.
When maintaining computer, you should hold the computer sides and avoid the rear circuit board colliding with other stiff things. You should hold and put it lightly. Do not touch the circuit board casually, because the static on your hand may harm electronic component on the hard disk.
You should not do low-level format lightly.
Actually, low-level formatting is the most thorough initialization of hard disk. After you perform such operation, the original protective data may be lost completely. To some degree, low-level formatting is destructive to hard disk. So only when it is extremely necessary that can you do such operation.
At the same time, avoid frequent high-level formatting operations.
It can do harm to hard disk as well. Although compared to low-level formatting, it is much better to your hard disk, it can affect hard disk performance as well. If you really want to do that, I suggest you to use the quick formatting order of parameter “Q” under the circumstance of not rearranging partitions. It is much safer for hard disks.
If you are not an experienced user, it will be head ache for you. Therefore, the best method to handle it is not to solve the problems when happen but learn how to prevent them in advance. So, in this article, I will tell you some simple methods to guard against hard disk problems.
Do not compress your hard disk.
In the past, it was common to compress disk by certain orders in hope to save more space. However, as compress volume file was augmenting gradually, its read-write speed was reduced obviously. What is worse, it might creak when reading or writing data which meant it worked with heavy burden. Nowadays, disk capacity has been expanded day by day, you do not have to worry about the low disk space problem. That is to say, it is necessary to compress disk on condition that there is enough disk space to run applications.
You should clear up hard disk regularly.
Proper disk defragmentation can improve computer speed without question. If too many disk fragments are accumulating excessively, it can slow down visiting speed and harm disk tracks as well. Defragment disk can help you clear up those rubbish and make computer regain high speed. But at the same time, you should not defragment disk frequently, it can also harm disk.
Besides, you should know how to hold hard disk correctly.
When maintaining computer, you should hold the computer sides and avoid the rear circuit board colliding with other stiff things. You should hold and put it lightly. Do not touch the circuit board casually, because the static on your hand may harm electronic component on the hard disk.
You should not do low-level format lightly.
Actually, low-level formatting is the most thorough initialization of hard disk. After you perform such operation, the original protective data may be lost completely. To some degree, low-level formatting is destructive to hard disk. So only when it is extremely necessary that can you do such operation.
At the same time, avoid frequent high-level formatting operations.
It can do harm to hard disk as well. Although compared to low-level formatting, it is much better to your hard disk, it can affect hard disk performance as well. If you really want to do that, I suggest you to use the quick formatting order of parameter “Q” under the circumstance of not rearranging partitions. It is much safer for hard disks.
Tuesday, March 23, 2010
How to Speed up Slow PC
Have you ever encountered that pc is running slower and slower and it is hard to play games smoothly? Even you have tried to scan computer completely, it is of no use to speed up computer. Today this article will introduce the main causes of slow pc and how to speed up pc with simple methods.
#1 Bulky registry
Since all the data is kept in the registry, any adding or removing program operation may cause or leave useless junk in it. So when you want to uninstall a game from computer, it is a must to do that completely. Otherwise, the rest may pile in the registry piece by piece and slow down pc one day.
The best methods to fix bulk registry is to use a professional tool rather than to do that manually, because any tiny mistake in the registry can lead to serious problems in the computer, let alone slow computer.
#2 Low disk spaces
Slow PC should blame for low disk spaces. Every time you install or uninstall programs into or from computer, there must produces loads of junks such as temporary and swap files which nibble disk space day after day. In this way, you may find that pc is running slower and slower.
As a result, in order to speed up PC, it is indispensable to free up disk space by cleaning junk files and disk fragments in the hard disk. Well, most junks are hidden in the C drive and the fragments can be reallocated by using Windows programs.
#3 Low virtual memory
It is undoubted that Windows-based systems boasts multitasks features which means you can run several applications at the same time. As a coin has two sides, such feature has high requirement to your computer.
Every time computer is short of ram to run applications, system can apply hard disk space to virtual memory so as to share the burden of ram. However, hard disk is not so qualified actually. So it requires you to set the maximum and minimum value of virtual memory properly.
#1 Bulky registry
Since all the data is kept in the registry, any adding or removing program operation may cause or leave useless junk in it. So when you want to uninstall a game from computer, it is a must to do that completely. Otherwise, the rest may pile in the registry piece by piece and slow down pc one day.
The best methods to fix bulk registry is to use a professional tool rather than to do that manually, because any tiny mistake in the registry can lead to serious problems in the computer, let alone slow computer.
#2 Low disk spaces
Slow PC should blame for low disk spaces. Every time you install or uninstall programs into or from computer, there must produces loads of junks such as temporary and swap files which nibble disk space day after day. In this way, you may find that pc is running slower and slower.
As a result, in order to speed up PC, it is indispensable to free up disk space by cleaning junk files and disk fragments in the hard disk. Well, most junks are hidden in the C drive and the fragments can be reallocated by using Windows programs.
#3 Low virtual memory
It is undoubted that Windows-based systems boasts multitasks features which means you can run several applications at the same time. As a coin has two sides, such feature has high requirement to your computer.
Every time computer is short of ram to run applications, system can apply hard disk space to virtual memory so as to share the burden of ram. However, hard disk is not so qualified actually. So it requires you to set the maximum and minimum value of virtual memory properly.
Monday, March 22, 2010
How to Increase Windows Speed
Are you looking for the efficient methods to speed up computer? There are some helpful tips that can give you a hand. Windows XP boasts stable operating system, but it also has to face a problem that computer speed and efficiency may be deceasing day by day. At this moment, it forces computer users into dilemma: to abandon this computer or continue to use it and tolerate that?
To halt slowing down Windows XP and increase Windows speed, please follow the methods step by step given below:
1. Run anti-virus software. Frankly speaking, if your computer runs slowly suddenly, it is probably viruses are haunting. That is why using anti-virus program should come to first place. It is the easiest way to increase Windows speed immediately.
2. Remove unwanted programs. Go to "Start" > "Control Panel" > "Add/Remove Programs", and look for the programs of no use but only occupying precious system resources. Do not forget to wipe out all the components of the useless programs, including software package，dynamic library links and so on. If not, such piling-up rubbish may block computer speed endlessly.
3. Disable some functions. Though Widows XP claims to provide bundle of functions to enhance system performance, actually, they serves little, instead, consume a large number of system resources. It is assured that you should close them down as soon as possible, such as "Error Reporting", "Hibernation" and "Remote Assistance".
4. Clear out junk files. As a matter of fact, a huge number of junk files are hiding in your system that can slow computer Windows XP. Empty recycle bin and go to "Disk Cleanup" respectively. It is quite right to clean junks in the C driver, deleting those temporary and duplicate files, history records,
5. Defragment disk properly. It is unavoidable that hard disk space becomes fragmented as you move, copy or delete files. To increase Windows speed, you are supposed to run defragmentation at intervals.
All the methods mentioned above are trumps to increase Windows speed. But are you fed up with speeding up computer manually and hoping to do that quickly?
To halt slowing down Windows XP and increase Windows speed, please follow the methods step by step given below:
1. Run anti-virus software. Frankly speaking, if your computer runs slowly suddenly, it is probably viruses are haunting. That is why using anti-virus program should come to first place. It is the easiest way to increase Windows speed immediately.
2. Remove unwanted programs. Go to "Start" > "Control Panel" > "Add/Remove Programs", and look for the programs of no use but only occupying precious system resources. Do not forget to wipe out all the components of the useless programs, including software package，dynamic library links and so on. If not, such piling-up rubbish may block computer speed endlessly.
3. Disable some functions. Though Widows XP claims to provide bundle of functions to enhance system performance, actually, they serves little, instead, consume a large number of system resources. It is assured that you should close them down as soon as possible, such as "Error Reporting", "Hibernation" and "Remote Assistance".
4. Clear out junk files. As a matter of fact, a huge number of junk files are hiding in your system that can slow computer Windows XP. Empty recycle bin and go to "Disk Cleanup" respectively. It is quite right to clean junks in the C driver, deleting those temporary and duplicate files, history records,
5. Defragment disk properly. It is unavoidable that hard disk space becomes fragmented as you move, copy or delete files. To increase Windows speed, you are supposed to run defragmentation at intervals.
All the methods mentioned above are trumps to increase Windows speed. But are you fed up with speeding up computer manually and hoping to do that quickly?
Sunday, March 21, 2010
How to Optimize Computer Performance
Since you have been using computer for a long time, it is undeniable that computer performance is reducing day by day, such as computer is running slower and slower, or an increasing number of junks are piling up in the computer.
If such problems have occurred in your computer, it is an alarm that you should take some actions to fix them so as to optimize computer performance. Well, that is what I want to tell you in this article.
1. Clean and optimize registry
When Windows boot up, system needs to read data in the registry and put them in the ram temporarily. Windows spend most time in this regard. Therefore, it is necessary to clean and optimize registry. As for how to do that, you can turn to certain optimizer to help you.
2. Delete excessive dynamic library link files.
In the Windows-based operating systems, there are many dynamic library link files in the system subdirectory. Among them, some are shared by many files while some are quite useless. In order to free up disk space and improve computer speed, you can delete them on condition that you are skillful in computer technology.
3. Maintain system regularly.
If you have put too many games and applications with lot of old and useless data, it is no doubt computer is running slower and slower as well as booting computer.
Therefore, you should maintain computer completely at proper intervals. For example, to defragment disk is really a good way to improve computer performance. Besides, it is a must to defragment the disk where you put systematic programs. This is the right way to speed up starting up order of Windows correctly.
4. Expand virtual memory
If you have large disk, it is quite suitable for you to set virtual memory. You can point to a disk that is seldom used and then fix maximum and minimum values which is twice as that of physical memory. In this way, when virtual memory is applying hard disk, the value does not have to change unstably. Instead, system can apply fixed space as virtual memory so as to speed up read-write speed.
What is more, it is advisable for you to set the values after defragmentation because virtual memory should be put in a continuous space without any fragment. Only by doing this, it can play greater role in optimizing computer performance.
If such problems have occurred in your computer, it is an alarm that you should take some actions to fix them so as to optimize computer performance. Well, that is what I want to tell you in this article.
1. Clean and optimize registry
When Windows boot up, system needs to read data in the registry and put them in the ram temporarily. Windows spend most time in this regard. Therefore, it is necessary to clean and optimize registry. As for how to do that, you can turn to certain optimizer to help you.
2. Delete excessive dynamic library link files.
In the Windows-based operating systems, there are many dynamic library link files in the system subdirectory. Among them, some are shared by many files while some are quite useless. In order to free up disk space and improve computer speed, you can delete them on condition that you are skillful in computer technology.
3. Maintain system regularly.
If you have put too many games and applications with lot of old and useless data, it is no doubt computer is running slower and slower as well as booting computer.
Therefore, you should maintain computer completely at proper intervals. For example, to defragment disk is really a good way to improve computer performance. Besides, it is a must to defragment the disk where you put systematic programs. This is the right way to speed up starting up order of Windows correctly.
4. Expand virtual memory
If you have large disk, it is quite suitable for you to set virtual memory. You can point to a disk that is seldom used and then fix maximum and minimum values which is twice as that of physical memory. In this way, when virtual memory is applying hard disk, the value does not have to change unstably. Instead, system can apply fixed space as virtual memory so as to speed up read-write speed.
What is more, it is advisable for you to set the values after defragmentation because virtual memory should be put in a continuous space without any fragment. Only by doing this, it can play greater role in optimizing computer performance.
Thursday, March 18, 2010
Improve Windows Vista Speed
Since you have been using Windows Vista for couples of months, it is no doubt that computer is slowing down day by day if you do not take any measure to keep its fast speed. Maybe you are not quite skillful in computer technology, but do not worry. This article will introduce certain simple methods to cure your slow computer.
Even though anti-virus fails to speed up computer, what is at the bottom of slow Windows Vista? Well, besides the aging hardware and viruses, there are two main causes—too many loading startup items and overstaffed system.
Open up “Control Panel” and uninstall certain programs that mean nothing to you any more. Meanwhile, some services are also of litter value for high Windows performance, just disable them immediately. By doing this, it can save a lot of space. This may be the great help that these services can do for computer. They include “Hibernation”, “Error Reporting”, “Offline Files”, to name but a few.
Sincerely speaking, it is much easier to handle the first problems. What you need to do is to disable certain startup items as much as possible. It is profitable and sufficient for high computer speed to keep a powerful anti-virus program. And the real problem to speed up Windows is how to fix overstaffed system because it is involved many aspects in the computer.
Since you want to use such system, it is wise to help increase system resource. So, to delete excessive fonts should be one of the solutions. As a matter of fact, a common user does not need to have so many fonts in the computer. It is counted that there are more than 190 kinds of fonts installed in the computer which can put off nearly 10 seconds to boot up. Well, get rid of some now.
Even though anti-virus fails to speed up computer, what is at the bottom of slow Windows Vista? Well, besides the aging hardware and viruses, there are two main causes—too many loading startup items and overstaffed system.
Open up “Control Panel” and uninstall certain programs that mean nothing to you any more. Meanwhile, some services are also of litter value for high Windows performance, just disable them immediately. By doing this, it can save a lot of space. This may be the great help that these services can do for computer. They include “Hibernation”, “Error Reporting”, “Offline Files”, to name but a few.
Sincerely speaking, it is much easier to handle the first problems. What you need to do is to disable certain startup items as much as possible. It is profitable and sufficient for high computer speed to keep a powerful anti-virus program. And the real problem to speed up Windows is how to fix overstaffed system because it is involved many aspects in the computer.
Since you want to use such system, it is wise to help increase system resource. So, to delete excessive fonts should be one of the solutions. As a matter of fact, a common user does not need to have so many fonts in the computer. It is counted that there are more than 190 kinds of fonts installed in the computer which can put off nearly 10 seconds to boot up. Well, get rid of some now.
Wednesday, March 17, 2010
Fix Blue Screen Errors
It is really troublesome for every user that computer falls into blue screen. Although various reasons can result in blue screen, it should mainly blame for the errors in driver programs, hardware or system compatibility, even for certain bugs in the applications. Well, you can learn First of all, you should use anti-virus software to check system and then you can fix the problem as follows:
First is to restart system.
When the system appears blue alert windows, you need to start up system. Under most circumstance, computer can go back to normal track by restarting computer. Normally, you can not start it by press “Ctrl + Alt + Del” but just press reposition button or turn off electric power to start up computer again.
After entering into system, you can check the error as follows:
1. Click “Start” > “Administrative Tools” and double-click “Event Viewer”,
2. In the “Event Viewer”, you can check the “Error Records” in the “Application” and “System” respectively.
3. Click the item and then you can check the detail of the failed startup service.
Or, you can type “eventvwr.msc” in the dialog box by clicking “Start” > “Run” and then you can enter into “Event Viewer” as well.
Second is to restore the “Last Known Good Configuration (your most recent settings that worked)”.
In fact, the blue alter can not bother you without specific reasons. Normally, it is caused by updating driver programs or installing certain software. Sometimes users delete some very important system files that can lead to blue screen probably. At this moment, you can restart the system and press “F8” quickly to choose “Last Known Good Configuration”.
By doing this, system can restore efficient information in the registry in the item of “HKEY/LOCAL/MACHINE/System/Current Control Set”. However, it is unable to fix errors caused by broken files or driver program problems.
Or you can choose to press “F8” and choose “Safe Mode” to see whether system can enter into it normally. If so, you have to be aware that problems are likely caused by driver programs or system service errors.
Third step is to see about the wrong code.
If you want to know the specific information of wrong code, you can look them up in the Microsoft official website. Do remember the code, especially the one of “0x0000001E”. In the website, you can find the details of problems.
First is to restart system.
When the system appears blue alert windows, you need to start up system. Under most circumstance, computer can go back to normal track by restarting computer. Normally, you can not start it by press “Ctrl + Alt + Del” but just press reposition button or turn off electric power to start up computer again.
After entering into system, you can check the error as follows:
1. Click “Start” > “Administrative Tools” and double-click “Event Viewer”,
2. In the “Event Viewer”, you can check the “Error Records” in the “Application” and “System” respectively.
3. Click the item and then you can check the detail of the failed startup service.
Or, you can type “eventvwr.msc” in the dialog box by clicking “Start” > “Run” and then you can enter into “Event Viewer” as well.
Second is to restore the “Last Known Good Configuration (your most recent settings that worked)”.
In fact, the blue alter can not bother you without specific reasons. Normally, it is caused by updating driver programs or installing certain software. Sometimes users delete some very important system files that can lead to blue screen probably. At this moment, you can restart the system and press “F8” quickly to choose “Last Known Good Configuration”.
By doing this, system can restore efficient information in the registry in the item of “HKEY/LOCAL/MACHINE/System/Current Control Set”. However, it is unable to fix errors caused by broken files or driver program problems.
Or you can choose to press “F8” and choose “Safe Mode” to see whether system can enter into it normally. If so, you have to be aware that problems are likely caused by driver programs or system service errors.
Third step is to see about the wrong code.
If you want to know the specific information of wrong code, you can look them up in the Microsoft official website. Do remember the code, especially the one of “0x0000001E”. In the website, you can find the details of problems.
Windows XP Slowing down?
Are you looking for the efficient methods to speed up computer? There are some helpful tips that can give you a hand. Windows XP boasts stable operating system, but it also has to face a problem that computer speed and efficiency may be deceasing day by day. At this moment, it forces computer users into dilemma: to abandon this computer or continue to use it and tolerate that?
To halt slowing down Windows XP and increase Windows speed, please follow the methods step by step given below:
1. Run anti-virus software. Frankly speaking, if your computer runs slowly suddenly, it is probably viruses are haunting. That is why using anti-virus program should come to first place. It is the easiest way to increase Windows speed immediately.
2. Remove unwanted programs. Go to "Start" > "Control Panel" > "Add/Remove Programs", and look for the programs of no use but only occupying precious system resources. Do not forget to wipe out all the components of the useless programs, including software package，dynamic library links and so on. If not, such piling-up rubbish may block computer speed endlessly.
3. Disable some functions. Though Widows XP claims to provide bundle of functions to enhance system performance, actually, they serves little, instead, consume a large number of system resources. It is assured that you should close them down as soon as possible, such as "Error Reporting", "Hibernation" and "Remote Assistance".
4. Clear out junk files. As a matter of fact, a huge number of junk files are hiding in your system that can slow computer Windows XP. Empty recycle bin and go to "Disk Cleanup" respectively. It is quite right to clean junks in the C driver, deleting those temporary and duplicate files, history records,
5. Defragment disk properly. It is unavoidable that hard disk space becomes fragmented as you move, copy or delete files. To increase Windows speed, you are supposed to run defragmentation at intervals.
All the methods mentioned above are trumps to increase Windows speed. But are you fed up with speeding up computer manually and hoping to do that quickly?
To halt slowing down Windows XP and increase Windows speed, please follow the methods step by step given below:
1. Run anti-virus software. Frankly speaking, if your computer runs slowly suddenly, it is probably viruses are haunting. That is why using anti-virus program should come to first place. It is the easiest way to increase Windows speed immediately.
2. Remove unwanted programs. Go to "Start" > "Control Panel" > "Add/Remove Programs", and look for the programs of no use but only occupying precious system resources. Do not forget to wipe out all the components of the useless programs, including software package，dynamic library links and so on. If not, such piling-up rubbish may block computer speed endlessly.
3. Disable some functions. Though Widows XP claims to provide bundle of functions to enhance system performance, actually, they serves little, instead, consume a large number of system resources. It is assured that you should close them down as soon as possible, such as "Error Reporting", "Hibernation" and "Remote Assistance".
4. Clear out junk files. As a matter of fact, a huge number of junk files are hiding in your system that can slow computer Windows XP. Empty recycle bin and go to "Disk Cleanup" respectively. It is quite right to clean junks in the C driver, deleting those temporary and duplicate files, history records,
5. Defragment disk properly. It is unavoidable that hard disk space becomes fragmented as you move, copy or delete files. To increase Windows speed, you are supposed to run defragmentation at intervals.
All the methods mentioned above are trumps to increase Windows speed. But are you fed up with speeding up computer manually and hoping to do that quickly?
Monday, March 15, 2010
Restore Point is Really Important
It is inevitable for every computer user that the systems have gone wrong once or more. In such occasion, what will you do? In fact, Windows provide a function called “Restore Point”, which may solve the problems. So, it is better for you learn the must knowledge about restore point.
Setting Restore point is simplest way to return your computer to previous normal state when your system goes wrong.
And, it does not restore all of things but just recover system files and registry so it hardly influences your files and data. Besides, the system restore does not like one-click restore which can save a restore point forever, instead, it can delete the previous ones at any moment.
You can set the system restore point manually and the system may set it automatically as well. But, the latter one can not be restored and an option in the disk can clear the restore point. Therefore, you have to make sure that your system restore is open then can set up a restore point manually.
It is better for you to set a restore point by using system restore. Such point contains the information of your registry so you can use it to cancel the changes on system.
However, since system restore may save any information and data of all the drivers, it takes up an increasing amount of disk space. Therefore, you can delete some backup system restore points regularly so as to free up disk space.
First click “Start”, point to “Program”- “Enter”-“Accessories”-“System Tool”-“System Restore”, then enter into “System Properties”, you can tick before “Turn off System Restore”. On the other hand, you can clean registry which can also solve the space shortage.
If you want to keep the restore point longer, you have to sacrifice your disk space. That is to say, you have to make balance between two.
Setting Restore point is simplest way to return your computer to previous normal state when your system goes wrong.
And, it does not restore all of things but just recover system files and registry so it hardly influences your files and data. Besides, the system restore does not like one-click restore which can save a restore point forever, instead, it can delete the previous ones at any moment.
You can set the system restore point manually and the system may set it automatically as well. But, the latter one can not be restored and an option in the disk can clear the restore point. Therefore, you have to make sure that your system restore is open then can set up a restore point manually.
It is better for you to set a restore point by using system restore. Such point contains the information of your registry so you can use it to cancel the changes on system.
However, since system restore may save any information and data of all the drivers, it takes up an increasing amount of disk space. Therefore, you can delete some backup system restore points regularly so as to free up disk space.
First click “Start”, point to “Program”- “Enter”-“Accessories”-“System Tool”-“System Restore”, then enter into “System Properties”, you can tick before “Turn off System Restore”. On the other hand, you can clean registry which can also solve the space shortage.
If you want to keep the restore point longer, you have to sacrifice your disk space. That is to say, you have to make balance between two.
Sunday, March 14, 2010
Tips for You to Speed up Computer
After using computer for a period of time, the starting up speed of system may become slower and slower because of frequent installing new programs. The sluggish computer speed is probably caused by too many loaded programs. As a result, you can clear up programs in the startup group so as to speed up system. This is what I want to share with you in this article.
First of all, you can delete the unnecessary loading orders in the “config.sys” and “autoexec.bat”. Normally, all the orders in these two folders can be removed for sure. You can click “Start” > “Run” and type “MSCONFIG”. In the popping up windows of “System Configuration Utility”, you feel free to cross out the ticks of “config.sys” and “autoexec.bat”. After doing that, you may find it is faster to start up computer without those useless files.
Second, delete the shortcuts in the starting up group. Some software can add starting programs to starting up group automatically. If such programs are piling up excessively in this group, it is no doubt that it can slow down system starting up speed. Therefore, you can get rid of certain programs so as to improve computer booting speed.
Right-click “Start” menu and choose “Open”—“Programs”—“Startup”. In this folder, you can delete all the shortcut icons because they are quite unnecessary for computer but just slow down starting up speed.
Third, uninstall resident programs in the system. Some programs can start up as system is booting, but their shortcuts do not display in the “Start”—“All Programs”—“Startup” menu. So, you can delete these programs. In the “System Configuration Utility”, you click “Startup” tab, you can choose the resident programs that you do not use frequently and delete them. By crossing out these programs, you can speed up computer obviously.
What is more, you can finish all of the operations mentioned above by using certain orders so as to optimize starting groups quickly. However, in the Windows 2000, there is no such function. If you want to do optimization, the only thing you can do is to alter registry. Is it disturbing? As a matter of fact, you can copy this program to system folder of Windows 2000. And you can just run it.
First of all, you can delete the unnecessary loading orders in the “config.sys” and “autoexec.bat”. Normally, all the orders in these two folders can be removed for sure. You can click “Start” > “Run” and type “MSCONFIG”. In the popping up windows of “System Configuration Utility”, you feel free to cross out the ticks of “config.sys” and “autoexec.bat”. After doing that, you may find it is faster to start up computer without those useless files.
Second, delete the shortcuts in the starting up group. Some software can add starting programs to starting up group automatically. If such programs are piling up excessively in this group, it is no doubt that it can slow down system starting up speed. Therefore, you can get rid of certain programs so as to improve computer booting speed.
Right-click “Start” menu and choose “Open”—“Programs”—“Startup”. In this folder, you can delete all the shortcut icons because they are quite unnecessary for computer but just slow down starting up speed.
Third, uninstall resident programs in the system. Some programs can start up as system is booting, but their shortcuts do not display in the “Start”—“All Programs”—“Startup” menu. So, you can delete these programs. In the “System Configuration Utility”, you click “Startup” tab, you can choose the resident programs that you do not use frequently and delete them. By crossing out these programs, you can speed up computer obviously.
What is more, you can finish all of the operations mentioned above by using certain orders so as to optimize starting groups quickly. However, in the Windows 2000, there is no such function. If you want to do optimization, the only thing you can do is to alter registry. Is it disturbing? As a matter of fact, you can copy this program to system folder of Windows 2000. And you can just run it.
Thursday, March 11, 2010
Clean System Junk
Do you find that available space in the system is reducing day by day, just like an old machine running slower and slower? Well, in order to surf on the Internet and use computer smoothly and fluently, you need to do something to refresh your computer.
It is unavoidable to produce a nice bit of junk files during installing and using Windows, including temporary files with “.tmp” and “.mp”, log files with “.log”, disk check file with “.chk”, temporary backup files with “.old” and “.bak” and more. And if you do not clean temporary Internet files regularly, the junk files on it especially swap files may expense more than a hundred MB of disk space.
Such system junk can not only waste valued disk space but also drag system running speed. It is really disturbing and depressing. As a result, you should learn how to dredge the silt caused by junk files so as to keep system tidy. Now I will introduce a method to clean system junks within several minutes as follows:
You can click “Start” > “All Programs” > “Accessories” > “Notepad” and then need to copy the letters listed below:
del /f /s /q %systemdrive%\*.tmp
del /f /s /q %systemdrive%\*._mp
del /f /s /q %systemdrive%\*.log
del /f /s /q %systemdrive%\*.gid
del /f /s /q %systemdrive%\*.chk
del /f /s /q %systemdrive%\*.old
del /f /s /q %systemdrive%\recycled\*.*
del /f /s /q %windir%\*.bak
del /f /s /q %windir%\prefetch\*.*
rd /s /q %windir%\temp & md %windir%\temp
del /f /q %userprofile%\cookies\*.*
del /f /q %userprofile%\recent\*.*
del /f /s /q "%userprofile%\Local Settings\Temporary Internet Files\*.*"
del /f /s /q "%userprofile%\Local Settings\Temp\*.*"
del /f /s /q "%userprofile%\recent\*.*"
And then you should click “Save as”. In the windows of “Save As”, you need to put it in the “Desktop”, choose “All Files” as type and set the file as “clean system junk.bat”. Do remember the filename extension must be “.bat”. In this way, you can make a junk file cleaner. Finally, just double-click it and you can clean system junks successfully.
It is unavoidable to produce a nice bit of junk files during installing and using Windows, including temporary files with “.tmp” and “.mp”, log files with “.log”, disk check file with “.chk”, temporary backup files with “.old” and “.bak” and more. And if you do not clean temporary Internet files regularly, the junk files on it especially swap files may expense more than a hundred MB of disk space.
Such system junk can not only waste valued disk space but also drag system running speed. It is really disturbing and depressing. As a result, you should learn how to dredge the silt caused by junk files so as to keep system tidy. Now I will introduce a method to clean system junks within several minutes as follows:
You can click “Start” > “All Programs” > “Accessories” > “Notepad” and then need to copy the letters listed below:
del /f /s /q %systemdrive%\*.tmp
del /f /s /q %systemdrive%\*._mp
del /f /s /q %systemdrive%\*.log
del /f /s /q %systemdrive%\*.gid
del /f /s /q %systemdrive%\*.chk
del /f /s /q %systemdrive%\*.old
del /f /s /q %systemdrive%\recycled\*.*
del /f /s /q %windir%\*.bak
del /f /s /q %windir%\prefetch\*.*
rd /s /q %windir%\temp & md %windir%\temp
del /f /q %userprofile%\cookies\*.*
del /f /q %userprofile%\recent\*.*
del /f /s /q "%userprofile%\Local Settings\Temporary Internet Files\*.*"
del /f /s /q "%userprofile%\Local Settings\Temp\*.*"
del /f /s /q "%userprofile%\recent\*.*"
And then you should click “Save as”. In the windows of “Save As”, you need to put it in the “Desktop”, choose “All Files” as type and set the file as “clean system junk.bat”. Do remember the filename extension must be “.bat”. In this way, you can make a junk file cleaner. Finally, just double-click it and you can clean system junks successfully.
Wednesday, March 10, 2010
Disk Defragment--How to Defragment Quickly?
It is known to all that the computer needs to defragment regularly so as to improve computer performance. And, a lot of people hope to accelerate defragmentation to save time and energy. So, you should be patient enough to read this article because it can give you a big hand in handling this problem.
First of all, you should make sure you have closed down the screensaver and exit all the application and checked whether there is something wrong with your hard disk. If all of there are OK, now , you can start the defragmentation.
Then, let us see how computer defragment usually.
Every time when you have to clean up the fragmentation, you have to follow the steps in the Windows:
Click “Start”—“Program”—“Accessories”—“System Tool”—“Disk Fragment Clean Program”, then point to the driver. Do you feel bothered about it? Is there any simpler way to clean up fragmentation quickly?
And, before defragmenting quickly, you have to reset your computer.
In the Windows Explore, click “Tool”—“Folder Options” to choose “File Type” tab, in the list of “Registered file types”, choose “Drive” and click “Edit”. And then in the dialog box, choose “New” to choose type “C:\Windows\defrag.exe "%1" \noprompt” in the column. At last, click “OK”. Now, open “My Computer”, you can right-click any drive needed defragmentation, in the shortcut menu to choose fast disk defragmenter. It is OK.
In conclusion, although you can defragment by using Windows’ defragmenter manually, you had better to turn to professional defrag software because it can defragment efficiently and completely.
First of all, you should make sure you have closed down the screensaver and exit all the application and checked whether there is something wrong with your hard disk. If all of there are OK, now , you can start the defragmentation.
Then, let us see how computer defragment usually.
Every time when you have to clean up the fragmentation, you have to follow the steps in the Windows:
Click “Start”—“Program”—“Accessories”—“System Tool”—“Disk Fragment Clean Program”, then point to the driver. Do you feel bothered about it? Is there any simpler way to clean up fragmentation quickly?
And, before defragmenting quickly, you have to reset your computer.
In the Windows Explore, click “Tool”—“Folder Options” to choose “File Type” tab, in the list of “Registered file types”, choose “Drive” and click “Edit”. And then in the dialog box, choose “New” to choose type “C:\Windows\defrag.exe "%1" \noprompt” in the column. At last, click “OK”. Now, open “My Computer”, you can right-click any drive needed defragmentation, in the shortcut menu to choose fast disk defragmenter. It is OK.
In conclusion, although you can defragment by using Windows’ defragmenter manually, you had better to turn to professional defrag software because it can defragment efficiently and completely.
Speed up Your Computer--How to Remove the Junk Files and Free Your Hard Disk Space?
Have you ever been annoyed that the free space in the disk of your computer system is reducing day by day? What is worse, your computer is running slower and slower. Because there is an increasing number of junk files in your hard disk which not only take up the disk but also hinder the running speed.
So, you have to remove such files so as to speed up your computer. Well, you can some ways to get rid of junk files in this article.
First of all, let’s see why there are so many junk files in your article.
When you install or use Windows, uninstall applications or surf on the Internet, it is vulnerable for your system to pile up junk files, including temporary files (e.g. *.tmp、*._mp), log files (*.log), temporary help files (*.gid), disk check files (*.chk), temporary backup files (e.g. *.chk) and so on. They are such heavy load that drags on your computer speed. Let’s do something to get rid of them.
Then, let’s find some ways to delete the junk files.
a. Delete the temporary files created by the system. As you have learned which files are the junk, you can use the checking function in the computer to find the junk files and delete them all. As “C: /Temp” and “C: /WINDOWS/Temp” are the hotbed for JUNK, you can delete them safely.
b. Delete the junk information in the running record. You can remove program names in the “Run” list, folders names in the “Documents” list and the folders of start configuration.
c. Delete the left files after uninstalling applications. You can remove the installing folders and the junk information in the “Add/Remove Program” and cancel automatic booting function.
Besides, you can delete or remove some key values in the “Registry Editor” to get rid of the junk files in order to speed up your computer.
So, you have to remove such files so as to speed up your computer. Well, you can some ways to get rid of junk files in this article.
First of all, let’s see why there are so many junk files in your article.
When you install or use Windows, uninstall applications or surf on the Internet, it is vulnerable for your system to pile up junk files, including temporary files (e.g. *.tmp、*._mp), log files (*.log), temporary help files (*.gid), disk check files (*.chk), temporary backup files (e.g. *.chk) and so on. They are such heavy load that drags on your computer speed. Let’s do something to get rid of them.
Then, let’s find some ways to delete the junk files.
a. Delete the temporary files created by the system. As you have learned which files are the junk, you can use the checking function in the computer to find the junk files and delete them all. As “C: /Temp” and “C: /WINDOWS/Temp” are the hotbed for JUNK, you can delete them safely.
b. Delete the junk information in the running record. You can remove program names in the “Run” list, folders names in the “Documents” list and the folders of start configuration.
c. Delete the left files after uninstalling applications. You can remove the installing folders and the junk information in the “Add/Remove Program” and cancel automatic booting function.
Besides, you can delete or remove some key values in the “Registry Editor” to get rid of the junk files in order to speed up your computer.
Subscribe to:
Posts (Atom)